Thiết bị đo nhiệt độ trong quá trình Galvanneal Land Ametek Vietnam

Xuất sứ:

Germany

Mô tả:

Đại lý phân phối Ametek Land Việt Nam

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Nhiệt kế hồng ngoại AMETEK LAND - Hỏa quang kế AMETEK LAND

The Galvanneal Strip Thermometer (GST) provides continuous, accurate measurements of temperature and emissivity on coated steel during the galvannealing reaction.

By maintaining control of the reaction zone, GST optimises the heating zone to produce high quality galvannealed strip. It also ensures high production yields of consistently high-quality coated steel demanded by the automotive industry.

Our high-quality GST infrared radiation thermometer is coupled to an intelligent LMG GS signal processor containing a unique automatic emissivity compensation algorithm. This provides a far more accurate, repeatable measurement than single wavelength or ratio thermometer technologies.

Specifically intended for use on wide, flat metallic strip produced in the galvannealing process, GST provides the highest possible measurement accuracy needed for this steelmaking application.

Measurement Range	300 to 600 °C
	600 to 1100 °F
Response Time	1 sec to 98%
Resolution	2°C/4°F
Focus	Infinity
Ambient Temperature Range
Specified	5 to 45 °C / 41 to 113 °F
Operating	0 to 50 °C / 32 to 122 °F
System Outputs
Temperature Indication	0 to 20 mA or 4 to 20 mA Nominal load resistance 500 ohms, maximum load including wiring 600 ohms
Surface Emissivity Indicaction	0 to 20 mA covering emissivity range 0.00 to 1.00 Nominal load resistance 500 ohms, maximum load including wiring 600 ohms
	Alarm relays (contact rating 50V a.c./d.c. at 0.5A maximum)
Output Update Time	30ms
Sealing	IP65
Vibration	3G any axis, 10 to 300 Hz
CE	EN 50-08-2 (immunity)
	EN 50-08-1 (emissions)
	IEC 1010 (electrical safety)
Processor Type	LMG GS
I/O Card Type	GST I/O Card