Thiết bị phát hiện mức xỉ trong sản xuất thép SDS-E Land Ametek

Xuất sứ:

Germany

Mô tả:

Hệ thống phát hiện xỉ than đá AMETEK (SDS)

Chia sẻ:

Số lượng

Chi tiết sản phẩm

Camera chụp ảnh có độ phân giải cao để phát hiện sự chuyển tiếp giữa thép và xỉ

Image Processing System (LIPS SDS-E)
Slag Detection:	Alarm activation when a preset percentage of either slag or steel detected within defined window
User Display:	Front page information display, plant logo and location identifier
Frame Rate:	30 frames/sec
Automatic Functions:	Auto tap detection, stream identification, steel/slag ratio, video file, log file of all data, steel/slag percentage graph, all saved as tap number.
Language:	User defined
Outputs:	Digital output card, DDE, OLE, Ethernet and OPC Options
Sensor Supply Unit
Functions:	Local connection interface between imaging sensor and image processing system
Cables	30/150/300 m pre-wired and labelled, greater distances to 1 km are available
Protective Enclosure
Service:	Water, air, power input, communications, video, located to the rear of the enclosure
Added Protection:	Sacrificial plate protects the main enclosure from direct impact
Sighting Tube:	Design significantly reduces the risk of direct impact of liquid steel against the field replaceable sapphire window
Air Bleed:	Provides positive pressure within the enclosure
Environmental Rating:	IP65
Thermal Imaging Sensor (SDS-E)
Temperature Measurement Range:	600 to 2000 °C / 1472 to 3632 °F
Thermal Image Resolution:	384 x 288 pixels
Detector:	Amorphous Silicon Focal Plane Array
Field of View:	7.5° (horizontal) x 5.5° (vertical)
Motorised Focusing Range:	4m / 13.1 ft to infinity
Temperature Resolution:	0.5 °C (for 600 °C blackbody)
Accuracy:	±1% absolute temperature (K)
Options
	Air Purge, Blower unit, Setup Monitor, Sensor Carry Case