MÁY KIỂM TRA SỨC CHỊU ĐỰNG CỦA CHAI PET
For PET bottles – Simulating filling process
PBBT-1 PET Bottle Burst Tester is specialized test equipment for testing the PET bottles. It’s designed in accordance with the three international test methods which are commonly used. Users can choose the test method basing on their requirement. The PBBT-1 is capable to test the capacity of resilience under certain pressure or the rupture test of the PET bottle.
Through the reproduction of the pressurization, the process has been linearized and it increases to the predetermined point or the point of bursting.
After selecting the test program, the cycle will start automatically depending on the settings. The touch screen displays the pressure value in real time and record the maximum pressure and burst pressure.
Optional part water recycling system could provide way of saving water and avoiding the unsteady pressure of tap water which may influence a normal test.
Additional booster could be chosen. It may help the PBBT-1 free of high pressure source.
- Standard equipment forthePET bottleindustry.
- 3internationaltest methods are available
- PLCintegrated & Touch screen control
- Automaticclamping and filling system
- Can store 10 operators and 30 products
- User defines the product lot number and sequence number
- Displaycurvesof pressure andvolume expansionduring the test
- Monitors and recordsthe temperature of thewaterduring the test
- Applicableto 2.5 L bottle(consult us forbigger size)
- Stainless steel design ensures the durability of tester
- RS232Cdata output: connected to either printer or software
- Integrated calibration function
Fill ramp mode:
The filling ramp mode is designed to simulate the situation of filling lines of PET bottles. Under this mode, the PET bottles are pressurized rapidly to the initially preset pressure and maintained for a given time (for example 13 seconds). Then continue to increase the pressure with a speed of 0.1 bar/s until the outbreak of the bottle or reaching the max pressure or volume. Preset parameter includes: initial screening pressure, maximum pressure, and expansion of volume limit.
Under this mode, PET bottle will be pressurized rapidly to the initially preset pressure and maintained for a predefined period.
Under this mode, user is able to create the pressure curve to meet the particular conditions of control. Users can define the pressure curve by steps, after the adjustment is made, the corresponding curve will be displayed on the user interface.
- Measuring range: 0 – 20 bar
- Resolution:1 bar
- Samplerange: Up to 2.5 L bottle
- Expansionin volume: Up to 2 L
- Power supply:115/230V,50 – 60Hz
- Pressurerequired:3 barwater/ 20 bar air source
- Temperature range: 0 to 50 °C
- Rear Panel: RS232 serial output
- Dimensions: 740 (L) × 500 (W) × 920 (H) mm
- Net weight: 70 kg
- Water recycling system
- Additional booster
- Compatible clamping system
- Mini printer
- Calibration pack (including high accuracy pressure gauge for pressure calibration / calibration graduated flask / spacer)
- “QualiBurst” Software
- PABT version with hot water spraying system
Máy kiểm tra sức nén của chai PBBT-1 AT2E -AT2E vietnam
- As Scholer
- AMETEK LAND
- Daiichi Electronic
- Flow meter
- PCI Instrument
- Red lion
- STI Vibration Monitoring
- TDK lambda
- Van der Graaf
- Bộ cách ly tín hiệu
- Bộ chia - Distributors
- Bộ chuyển đổi tín hiệu nhiệt độ
- Bộ chuyển đổi tín hiệu cảm biến
- Bộ chuyển đối tín hiệu điện áp
- Bộ chuyển đổi tín hiệu xung
- Thiết bị báo động
- Mô đun tính toán hiệu chỉnh
- Mô đun mở rộng
- Bộ chuyển đổi xoay chiều và một chiều
- Bộ tạo tín hiệu
- Bộ chuyển đổi tín hiệu truyền thông
- Bộ Khuếch đại cách ly tín hiệu
- YOUNG TECH
- Một số hãng khác