60-2944-1 fireye vietnam - Nhà phân phối Fireye vietnam

INSTALLATION INSTRUCTIONS 133-766 TERMINAL BLOCK WIRING BASE FOR BURNERPRO FLAME SAFEGUARD and BOILER CONTROL

Wiring base part number 60-2944-1 offers a closed wiring compartment suitable for mounting inside or outside of a cabinet. Knockouts are located along the bottom and side of the wiring base. The terminal block contact positions are appropriately numbered to correspond to the pinout of the BurnerPRO control. Torque rating on terminal block screw is 4.4 in/ lbs to 5.3 in/lbs. As shipped, all knockouts on the wiring base are in place and can be easily removed with knockout tool (i.e., screw driver). Mounting of the base can be accomplished with 2 screws. The recommended screw sizes are #10 PAN HD x 5/8inch (5mm PAN HD x 16mm) and #10 PAN HD x 3/8 inch (5mm PAN HD x 10mm). Refer to Figure 1 below for mounting dimensions. Grounding Wire Each BurnerPRO control is fitted with a grounding wire. Attach the open end of the grounding wire to a ground terminal on the wiring base (see figure 1). Undo the screw terminal with a screwdriver and place the ground lug over the terminal. Re-install the screw over the ground lug. Do not attach the grounding wire to a Neutral (N) terminal.

60-2944-1 fireye vietnam - Nhà phân phối Fireye vietnam